Manhattan 525459 Manual do Utilizador

WIRELESSROUTER USER MANUAL MODELS 525459, 525466, 525480 MH-525459/525466/525480-UM-0713-01150N Model 505459300N Model 5054661200AC Mode

10SYSTEM & NETWORK SETUP2. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically,” then click “OK.”2.2.3 Rou

11SYSTEM & NETWORK SETUP2. With the Run window displayed, enter “cmd” in the “Open:” text eld, then click “OK.”

12SYSTEM & NETWORK SETUP3. Enter “ipcong,” then press <Enter>. The IP address displays, followed by the default gateway. In the example b

13SYSTEM & NETWORK SETUP2.3 Quick Setup The Quick Setup procedure lets you congure all the settings required for quick Internet access..The init

14SYSTEM & NETWORK SETUPClick “Next” to continue to the next screen of the Quick Setup procedure, where you select the broadband (Internet connect

15SYSTEM & NETWORK SETUPMAC address — Enter the MAC address of your computer here if your service provider only permits a computer with a certai

16SYSTEM & NETWORK SETUP2.3.3 Setup Procedure for PPPoE xDSLUser Name — Enter the username assigned by your ISP. Password — Enter the password as

17SYSTEM & NETWORK SETUPcorrectly entered; otherwise, the Internet connection will fail even if the PPTP settings are correct. Contact your ISP if

18SYSTEM & NETWORK SETUP2.3.5 Setup Procedure for L2TP xDSLL2TP is another popular connection method for xDSL and other Internet connection types

19SYSTEM & NETWORK SETUP2.4 Basic Setup This section explains how to change the time zone, password and remoteNOTE TO DSL USERSWhile PPPoE is the

2 Thank you for purchasing this Manhattan® Wireless Router: Model 525459 (150N 4-Port), Model 525466 (300N 4-Port) or Model 525480 (1200AC 4-Port).

20SYSTEM & NETWORK SETUPmanagement settings. Start your Web browser and log on to the router’s Web management interface by opening http://manhatta

21SYSTEM & NETWORK SETUPIf the passwords entered in the “New Password” and “Conrmed Password” elds aren’t the same, you’ll see the message at

22SYSTEM & NETWORK SETUP2.5 Setting Up an Internet Connection (WAN Setup) The Internet connection setup can be done by using the Quick Setup menu

23SYSTEM & NETWORK SETUP2.5.1 Setup Procedure for Dynamic IPHost Name — Enter the host name of your computer. (This is optional and is only req

24SYSTEM & NETWORK SETUP2.5.3 Setup Procedure for PPPoEUser Name — Enter the user name assigned by your Internet service provider. Password — Ent

25SYSTEM & NETWORK SETUPentered; otherwise, the Internet connection will fail even if the PPTP settings are correct. Contact your ISP if you don’t

26SYSTEM & NETWORK SETUP2.5.6 Setup Procedure for Telstra BigPondThis procedure is only for the Telstra BigPond network service in Australia. Use

27SYSTEM & NETWORK SETUPpreferred DNS server or use a static IP address, or if your service provider didn’t assign the IP address of the DNS serve

28SYSTEM & NETWORK SETUP2.6 LAN Conguration This section explains the IP address settings of the local network. Normally, there is no need to ma

29SYSTEM & NETWORK SETUPSubnet Mask — Enter the subnet mask for this network. 802.1d Spanning Tree — Select “Enable” or “Disable” from the drop-do

3TABLE OF CONTENTSTABLE OF CONTENTS section page section page1 HARDWARE ... 5 1.1 Front Panel

30SYSTEM & NETWORK SETUP2.6.3 Static DHCP Leases Table This function allows you to assign a static IP address to a specic computer forever, so y

31SYSTEM & NETWORK SETUPthe wireless function of this router to connect to the Internet and share resources with other computers on your network.

32SYSTEM & NETWORK SETUP • “2.4 GHz (B+G+N)” allows 802.11b, 802.11g and 802.11n wireless network clients to connect to this router (maximu

33SYSTEM & NETWORK SETUPN Data Rate — Same as above, but only for 802.11n clients. Channel Width — Set the channel width of the wireless radio. NO

34SYSTEM & NETWORK SETUPcard information or bank records. Click the “Security Settings” menu on the left of the Web management interface to select

35SYSTEM & NETWORK SETUPDefault Tx Key — You can set up to four sets of WEP keys, and you can designate one as the default here. NOTE: If you do

36SYSTEM & NETWORK SETUP2.7.3.3 Wi-Fi Protected Access (WPA) Pre-Shared Key WPA Unicast Cipher Suite — Once you select one of the three cipe

37SYSTEM & NETWORK SETUP “WPA (TKIP),” “WPA2 (AES)” or “WPA2 Mixed” — make sure your wireless clients support it. RADIUS Server IP address — En

38SYSTEM & NETWORK SETUP “aa-bb-cc-dd-ee-ff” or “aa:bb:cc:dd:ee:ff,” just enter “aabbccddeeff” (without the quote marks). Comment — This is op

39SYSTEM & NETWORK SETUPto connect to this wireless router. Click the “Wireless” menu on the left of the Web management interface, then click “WPS

4SAFETY GUIDELINESSAFETY GUIDELINESFor the protection of equipment users and connected devices, follow these safety guidelines:1. This router is desig

40SYSTEM & NETWORK SETUP WPA or WPA2, you should abandon WEP entirely. • You can hide the ESSID of this router by setting the “Broadcast ESSID

41ADVANCED FUNCTIONS3 ADVANCED FUNCTIONS3.1 Quality of Service (QoS) Quality of service provides an efcient way for computers on the network to sha

42ADVANCED FUNCTIONSCurrent QoS Table — All existing QoS rules are shown here. Add — Click to add new QoS rules (see section 3.1.2 Adding a New QoS Ru

43ADVANCED FUNCTIONSLocal IP Address — Specify the local (source) IP address that will be affected by this rule. Enter the starting IP address in th

44ADVANCED FUNCTIONSClick the “NAT” menu on the left of the Web management interface. NAT is enabled by default, and there is normally no need to chan

45ADVANCED FUNCTIONSType — Select the type of connection from the drop-down menu: “TCP,” “UDP” or “Both.” If you’re not sure which to use, select “B

46ADVANCED FUNCTIONSPrivate IP — Enter the IP address of the computer on the local network that provides Internet service. Computer Name — With all

47ADVANCED FUNCTIONS Current Trigger-Port Table — All the settings for the specifal applications are listed here. Delete — To remove a Sp

48ADVANCED FUNCTIONS 3.3 Firewall In addition to the NAT feature, this router provides rewall functionality to block malicious intruders from ac

49ADVANCED FUNCTIONS address label of your device reads “aa-bb-cc-dd-ee-ff” or “aa:bb:cc:dd:ee:ff,” just enter “aabbccddeeff” (without the qu

1 HARDWARE1.1 Front Panel DisplayLED Status Description PWR On Rou

50ADVANCED FUNCTIONS3.3.2 Add PCClicking “Add PC” on the Access Control screen will display this page.Client PC Description — Enter up to 16 alphanum

51ADVANCED FUNCTIONSProtocol — If the service you need is not listed, you can create a new service yourself. Select “TCP” or “UDP” from the drop-do

52ADVANCED FUNCTIONS “http://www.blocked-site.com” or “http://11.22.33.44”), or a keyword contained in a URL (like “pornography,” “sex,” “banner ad

53ADVANCED FUNCTIONS and the router will lter this kind of trafc out. Advanced Settings — Click to set advanced settings of the DoS prevention meth

54ADVANCED FUNCTIONS Enable DMZ — Check to enable this function; uncheck to disable. Public IP — Select “Dynamic IP” or “Static IP.” If you se

55ADDITIONAL FUNCTIONS4 ADDITIONAL FUNCTIONS/FEATURES4 .1 Status This screen and the submenus that can be accessed from here show information about

56ADDITIONAL FUNCTIONSThis screen shows IP address information the router has obtained. If you experience problems with your Internet connection, open

57ADDITIONAL FUNCTIONS4.1.5 Active DHCP ClientIf you’re using the DHCP server function of this router, you can use this function to check all active

58ADDITIONAL FUNCTIONS reload it at a later time. You can save different congurations, each with unique settings, and reload them as needed. Backup S

59ADDITIONAL FUNCTIONSBrowse — Click to locate the rmware le you’ve downloaded. If the le is in Zip (compressed archive) format, you need to unc

6SYSTEM & NETWORK SETUP2 SYSTEM & NETWORK SETUP2.1 Connecting the Router 1. Connect your DSL or cable modem to the WAN port of the router us

60TROUBLESHOOTING5 TROUBLESHOOTINGThis section helps you troubleshoot problems you may be experiencing with the router. Before you contact your deale

61TROUBLESHOOTINGMy wireless notebook cannot see or connect to the wireless network. • Check if Broadcast ESSID is off. Remember that you need to in

62GLOSSARY6 GLOSSARYDefault Gateway (Router): Every non-router IP device needs to congure a default gateway’s IP address. When the device sends out

63GLOSSARYISP: Internet Service Provider. An ISP is a business that provides connectivity to the Internet for individuals and other businesses or orga

© IC Intracom. All rights reserved. Manhattan is a trademark of IC Intracom, registered in the U.S. and other countries.manhattan -pro d u cts.com

7SYSTEM & NETWORK SETUPNOTE: If this procedure is successful, skip the following subsections and proceed to 2.3 Using Quick Setup. If the above pr

8SYSTEM & NETWORK SETUP2. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically,” then click “OK.”

9SYSTEM & NETWORK SETUP2.2.2 Windows Vista/7 IP Address Setup 1. Click “Start,” then go to the control panel. Click “View Network Status and Task